BRIDGE CAST X can adjust the audio for a computer game app or voice chat.
Follow the steps below.
- Connect a microphone to the MIC jack (XLR) and headphones or headset to the PHONES/HEADSET jack (stereo mini 4-pole). *These jacks are on the rear panel.
See "Connecting to a computer/external equipment" in the BRIDGE CAST X Owner's Manual.
- Install the BRIDGE CAST app/driver.
See "Installing the BRIDGE CAST app and driver" in the BRIDGE CAST X Owner's Manual.
- Connect the USB port and the computer with the included USB cable (Type-C to Type-C, or Type-C to Type-A).
- Launch the BRIDGE CAST app and set it up as follows:
See "Getting ready to use a mic" in the BRIDGE CAST X Owner's Manual.- MIC TYPE: Select a mic type according to the mic you’re using.
-
MIC GAIN: Adjust the mic’s input gain so that the input audio is at the appropriate level.
-
Only for Windows
Before launching the game app, set it up as follows:
- Win 11: Right-click on the speaker icon in the taskbar > Click on "Volume Mixer" > Select "GAME (BRIDGE CAST X)" as output device
-
Win10: Right-click on the speaker icon in the taskbar > Click "Open Sound Settings" > Select "GAME (BRIDGE CAST)" for "Choose your output device"
See "Configuring the device settings on your computer" > " List of devices" and "Examples of settings" in the BRIDGE CAST X Owner's Manual.
- In the settings of a Voice Chat app ( e.g., Discord), select "MIC (BRIDGE CAST X)" as the input device and "CHAT (BRIDGE CAST X)" as the output device.
See "Configuring the device settings on your computer" > "Examples of settings" in the BRIDGE CAST X Owner's Manual.
- In a streaming app ( e.g., OBS), select "STREAM (BRIDGE CAST X)" for the mic audio.
*Make sure the audio filters on OBS are disabled.