GO:KEYS 5/GO:KEYS 3 System Program Ver.1.04 added modulation control to the Wheel.
To assign a function to the Wheel, update the system program to the latest version and follow the steps below.
- On the home screen, press the [f4] (SETTING) button.
The Tone setting screen appears. - Press the [f3] (COMMON) button.
The parameters are shown. - Press the [split/dual] button to switch between keyboard modes.
- Edit the settings by using the dial to select 'Wheel".
- Press the [enter] button to move the cursor to a value.
-
Use the dial again to choose the function you wish to assign from the table below:
Wheel PITCH BEND Controls the pitch bend. MODULATION Controls the modulation depth. BEND-U+MOD Raise the wheel to control the pitch bend, and lower the wheel to control the modulation depth. MOD+BEND-D Raise the wheel to control the modulation depth, and lower the wheel to control the pitch bend. BEND&MOD Controls the pitch bend and modulation depth at the same time. BEND&MOD-X Controls the pitch bend; and when the wheel is moved to around its maximum position, this controls the modulation depth. - Press the [enter] button to return to the parameters.
Once you have chosen and set your function for the mod wheel, make sure to save the scene.