If USB audio is unavailable on the FANTOM 6 EX, FANTOM 7 EX, or FANTOM 8 EX after installing the USB driver, verify the following:
- A USB cable that supports data transfer is used.
- The "USB Driver" setting is set to "VENDOR".
Use the following procedure to check or change the setting:
- Press the [MENU] button.
The MENU screen appears. - Touch <SYSTEM>.
The SYSTEM screen appears. - Touch the <GENERAL> tab.
- Use the [E2] knob to select "USB Driver".
- Use the [E3] knob to set it to "VENDOR".
- Press the [WRITE] button to save the settings.
- Turn the power off, then on again.