Although the RC-300’s EXP 1 pedal is adjusted for optimal performance when shipped from the factory, extended use over time and under certain usage conditions may result in the pedal going out of adjustment.
If you find the pedal exhibiting problems, such as “if you’re unable to obtain the minimum value or the maximum value,” you can readjust/recalibrate the pedal using the following procedure.
- Hold down the [SYSTEM] button and switch on the power.
- When “EXP1:Set to MIN” is displayed, rock the [EXP 1] pedal all the way back to heel position down. Release your foot from the [EXP 1] pedal, and then press the [WRITE] button.
- When “EXP1:Set to MAX” is displayed, rock the [EXP 1] pedal fully forward or toe down.
Release your foot from the [EXP 1] pedal, and then press the [WRITE] button. - When the message “Complete!” appears in the display, recycle power off and back on, check and test the EXP1 pedal functionality and range sweep, then continue looping.