To select scenes in the JUNO-X, you will use the standard MIDI protocol for selecting sounds:
- Bank Select MSB (CC00)
- Bank Select LSB (CC32)
- Program Change (PC)
The following messages are used to select the 256 Scenes:
| MSB | LSB | PC | SCENE |
|---|---|---|---|
| 085 | 000 | 001 - 128 | 001 - 128 |
| 085 | 001 | 001 - 128 | 129 - 256 |
You must transmit these messages on the Ctrl Ch (Control Channel) that is selected in the JUNO-X. You can change or view this parameter with the following procedure:
- Press the [MENU] (WRITE) button.
- Use the [▲SELECT▼] knob to select “SYSTEM,” and then press the [ENTER] (INIT) button.
- Use the [▲SELECT▼] knob to select “Ctrl Ch" and use the [- VALUE +] knob to change the value.
Value: 1–16, OFF - To save the edited settings, hold down the [SHIFT] button and press the [MENU] (WRITE) button.
A confirmation message appears.
If you decide to cancel, press the [EXIT] button. - To execute, press the [ENTER] (INIT) button.