GX-10: How to Update the System Program

Here's how to update the system program firmware for the GX-10.

Details about the changes can be found in the “UPDATE HISTORY” section of the system program download page.

Updating the system program on the GX-10 can improve and add features. Before you start, check the system program version of your GX-10.

1. Make sure the power is turned off.
2. Turn on the power.
   The version information appears in the lower-right corner of the startup screen.
3. After confirming the version, turn off the power.

Required Items

• GX-10
• A computer
• USB cable (Ensure the cable supports data transfer. The GX-10 uses a USB Type-C port.)

CAUTION

• Never apply this update data to any product other than the GX-10.
  This update data may destroy the data or system program of other products.
• Never power-off your GX-10 while the update is in progress!
  If a power failure or similar accident occurs during the update process, the GX-10 won’t be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.

UPDATE PROCEDURE

1. While holding down the [WRITE] button, turn on the GX-10.
   
   * Keep holding the [WRITE] button until “Updater” is displayed.
2. Connect the GX-10 to your computer using a USB cable.
   
3. On your computer, open the GX-10 drive.
4. Access the following page and download the latest System Program.
   https://www.boss.info/global/support/by_product/gx-10/updates_drivers/
   Example:
   
5. Extract the downloaded ZIP file:
   • Windows: Right-click the file and select "Extract All."
   • macOS: Double-click the file.
6. Open the extracted folder (gx10_sys_vxxx) and copy all the files to the root directory of the GX-10 drive (the topmost level).
   Note: xxx represents the version number.
   
7. After the copy is complete, eject the GX-10 drive:
   • Windows: Right-click the GX-10 drive and select "Eject."
   • macOS: Drag the GX-10 icon to the Trash.
     The update will begin automatically.
     Caution: Do not turn off the power during the update process.
8. When “COMPLETE” is displayed, turn off and then turn on the GX-10.