To select kits in the TM-6 PRO via MIDI, you need to use standard Program Change (PC) messages.
The following messages are used to select the 100 Kits:
| PC | KIT |
|---|---|
| 1 - 100 | 1 - 100 |
You must transmit these messages on the MIDI Ch (MIDI Channel) that is selected in the TM-6 PRO. Furthermore, the Program Change Rx and MIDI Tx/Rx Sw must be set to ON for the TM-6 PRO to process incoming program change messages. You can change or view these parameters with the following procedure:
- Press the [MENU] button.
- Use the cursor buttons to select "MIDI," and then press the [ENTER] button.
- Set the following parameters:
- MIDI Tx/Rx Sw: ON
- MIDI Channel: The MIDI channel must match the transmit channel of the connected MIDI device.
- Program Change Rx: ON
- Press the [EXIT] button several times to return to the KIT screen.
The new settings are saved automatically.