Here’s how the settings stored in the WAZA Tube Amp Expander Core (W-TAE CORE) can be returned to their factory-set condition (FACTORY RESET).
- Turn off this unit.
- Set the [REACTIVE LOAD] knob to COMBO.
- Set the [RIG] knob to “9”.
- Turn the power on while holding down the [WRITE] button.
The [WRITE] button blinks red.
* To cancel the operation, turn off the power. - Press the [WRITE] button.
This executes the FACTORY RESET.
The SIG/PEAK indicator blinks red during the FACTORY RESET.
* Don’t turn off the power while the FACTORY RESET is in progress.
The SIG/PEAK indicator lights up green when the FACTORY RESET is complete. - Turn this unit on again.
All settings return to their factory-set state.