GO:KEYS 3 IN: Assigning a function to the mod wheel

The GO:KEYS 3 IN's mod wheel can be assigned a multitude of parameters, including modulation and pitch bend, amongst other functions.

To assign a function, you can follow these steps.

1. On the home screen, press the [f4] (SETTING) button
   The Tone setting screen appears
2. Press the [f3] (COMMON) button.
   The parameters are shown
   
   
3. Press the [split/dual] button to switch between keyboard modes.
4. Edit the settings by using the dial to select 'Wheel'
5. Press the [enter] button to move the cursor to a value
6. Use the dial again to choose the function you wish to assign from the table below:
   

   Wheel	PITCH BEND	Controls the pitch bend.
   	MODULATION	Controls the modulation depth.
   	BEND-U+MOD	Raise the wheel to control the pitch bend, and lower the wheel to control the modulation depth.
   	MOD+BEND-D	Raise the wheel to control the modulation depth, and lower the wheel to control the pitch bend.
   	BEND&MOD	Controls the pitch bend and modulation depth at the same time.
   	BEND&MOD-X	Controls the pitch bend; and when the wheel is moved to around its maximum position, this controls the modulation depth.

7. Press the [enter] button to return to the parameters.
   Once you have chosen and set your function for the mod wheel, make sure to save the scene.