V-STAGE 76, V-STAGE 88: Restoring the factory settings (factory reset)

Performing a factory reset will return the V-STAGE to its original factory settings. 
Refer to the “Restoring the Factory Settings (Factory Reset)” section of the V-STAGE Reference Manual, or follow the steps below.

NOTE: 
– If you may need to restore your current settings later, make sure to back up your data to a USB flash drive (sold separately; 32 GB or less is recommended) before proceeding. For instructions on how to back up data, refer to the “Backup” section of the V-STAGE Reference Manual. 
– A factory reset does not initialize Roland Cloud licenses. If you want to install a Model Expansion using a different user license, run the procedure in the “Initializing a User License” section of the V-STAGE Roland Cloud User’s Guide.

1. Press the [MENU] button.
   The menu screen appears.
   
2. Turn the [SELECT] knob to select "Utility", then press the [SELECT] knob.
   
3. Turn the [SELECT] knob to select "Reset", then press the [SELECT] knob.
   A confirmation message appears.
   
4. Turn the [SELECT] knob to select “OK”.
   
5. Press the [SELECT] knob.
   This executes the factory reset. Never turn off the power while this operation is in progress.
6. When the following display appears, turn the power off and then on again.