Each sound generator part on the V-STAGE is automatically routed via USB audio to the track inputs of a DAW (Digital Audio Workstation) in the following way:
Stereo Input 1/2 = All Parts
Stereo Input 3/4 = Sub Outs
Stereo Input 5/6 = Organ
Stereo Input 7/8 = A. Piano
Stereo Input 9/10 = E. Piano
Stereo Input 11/12 = Synth A
Stereo Input 13/14 = Synth B
Stereo Input 15/16 = Line Inputs
Stereo Input 17/18 = Mic
In order to use this functionality, the V-STAGE Driver must be installed on the computer.
- Set the USB driver mode to "VENDOR".
[MENU] > System > General > USB Driver - Save the changes (System Write), then turn the power back on.
- Install the V-STAGE Driver on your computer.