DJ-505 added features version 1.10
*Added TR-606/707 sounds to the TR-S
*Increases the KIT count from 8 to 12 with TR-606/707 sounds
*Added Master Effect for TR-S
1. Press [SHIFT] + [INST]
2. Press buttons [1]-[16] to select the Kit.
3. Rotate TUNE, ATTACK, DECAY to change effect values
4. Parameters:
· TUNE:Drive
· ATTACK:Compressor
· DECAY:Transient
*Added “Step Loop” function for TR-S
1. Press [Shift] + [Scale] to enter Step Loop mode.
2. Press a pad [1]-[16] to loop the selected step (unlatched)
3. Press [Shift] + a pad [1]-[16] to hold selected loop (latched)
*Added Performance Pad Sensitive setting
1. Hold down [LOAD] DECK2 and turn power on.
2. Press PAD L1 and rotate value knob. (The smaller the value the higher the sensitivity)
*Added Back Spin Length setting
1. Hold down [LOAD] (DECK2) and turn power
2. Press PAD L3 and rotate value knob to set the desired spin back time
*Jog Wheel Release Response setting
1. Hold down the [LOAD] (DECK2) and turn power.
2. Press PAD L2 and rotate value knob.
Increased BPM range (5-500BPM)
*Added TR KIT SELECT for TR-S
1. Press [Shift] + [INST]
2. Press and hold [PAD] and rotate Value knob.
*Added KIT COPY for TR-S
1. Press [SHIFT] + [INST]
2. Hold down the [SHIFT] button and press one of the TR-S pads [1]-[16] to select the copy-source Kit.
3. Press one of the blinking TR-S pads [1]-[16] to select the destination kit.