Note: Audio files being imported from a CD must meet the following specifications:
- Format: WAV or AIFF (mp3 or other formats are not compatible)
- Sample Rate: 44.1kHz
- Bit Depth: 16 bit
- Place the CD containing the WAV file(s) into the BR-1180CD’s CD-R/RW drive, then press [DATA SAVE/LOAD].
- Use [CURSOR] to select the “WAVE MENU” icon, then press [ENTER].
- Using [CURSOR] again to select the “IMPORT” icon, then press [ENTER].
* If the WAV files are collected in a folder, then the folder name and a folder icon is displayed. To show the WAV files within the folder, move the cursor to the folder name and press [ENTER]. - To switch the format of the wave file you want to import, move the cursor to “TYPE,” then press [ENTER].
[ENTER] acts as a toggle, switching the file format between WAV and AIFF each time it’s pressed. - Use [CURSOR] to select the waveform data files you want to import.
At this point, you can hear what the waveform data sounds like by moving the cursor to “PRVW” and pressing [ENTER] (WAVE Preview). Press [ENTER] again to cancel the preview. - Move the cursor to “SEL,” then press [ENTER].
- Use [CURSOR] and the TIME/VALUE dial to specify the import-destination track.
- Use [CURSOR] to move the cursor to “LOC,” then press [ENTER].
At this time, you can select “DISP” and press [ENTER] to switch between ways to specify the location (measures, time, markers).
Set the following items.
START (start point): Specify the starting location of the import-destination track.
END (end point): Specify the ending location of the import-destination
track..
* If, after specifying the above parameters in terms of location you switch to the measure or marker indication, a “+” may appear if a discrepancy between the indicated position and the actual position arises. When using measures or markers to make the specification, you can use the TIME/VALUE dial in the respective screen to eliminate the discrepancy.
* If you want the import range to be from the beginning of the waveform data to the end, select the “ALL” icon and press [ENTER]. - Move the cursor to “GO,” then press [ENTER].
- When “Complete!” appears, the import is finished.