Tie added to gate input values (Step sequencer mode)
Now you can select a “tie” as a gate input value.
By using a tie, you can make a smooth connection to the next step without applying
glide (GLIDE)
Entering Gates (GATE) in SEQ mode
1. Press the [GATE] button to make it light.
2. While holding down the step button at which you want to enter a gate, use the [VALUE] knob to select the gate (10–100 or TIE).
The display indicates the value.
• If you want to enter the same gate at all steps, press the step buttons at which you want to enter the gate;
then hold down the [GATE] button and turn the [VALUE] knob.