DJ-808 system program version 1.10
1.Hold down the [CLEAR] button and turn on the power.
The message "UPdt" appears on the display.
2.Connect the computer to the DJ-808's USB port by a USB cable.
Open the "DJ-808" drive folder in your personal computer. (DJ-808 will show up as an external drive.)
3.Copy (drag and drop) the file included in the folder "DJ808_UPD.BIN" into the "DJ-808" icon.
* Do not copy the "dj808_sys_110" folder.
4.After copying the file is completed, remove the USB drive from the personal computer.
With Windows
Right-click on the "DJ-808" icon in My Computer and execute "Eject."
With Mac
Drag the "DJ-808" icon to the Trash icon in the Dock.
5.Disconnect the USB cable.
6;Press the [ CLEAR ] button to start updating the file.
The message "Fin" will appear on the display when the update process completes.
Turn the DJ-808 power off.
7.Press the [ POWER ] switch to turn the power off and then on again.
* At startup for the first time after the update, the [CLEAR] button might flash rapidly. Continue waiting until the unit starts normally.
8.Turn the DJ-808 power off.
9. FACTORY RESET - Hold down the [ BACK ] button of the browser section, and press the [ POWER ] switch to turn on the power.
The display indicates "rst," and the [ START/STOP ] button of the TR-S section blinks.
* If you decide to cancel the operation, turn off the power.
* Please refer to the "Backing Up or Restoring TR-S Data" in the [ Owner's Manuals ] page for Backing Up or Restoring TR-S data.
Press the blinking [ START/STOP ] button.
Factory reset begins.
When the display indicates "OK" factory reset is complete.
* Never turn off the power until the display indicates "OK"
After the factory reset is complete, press the [ POWER ] switch to turn the power off and then on again.