GT-1000: Set Up TUNER for CURRENT NUMBER
Set up the GT-1000 TUNER for CURRENT NUMBER so that the CURRENT PATCH NUMBER being played can be used to TOGGLE the TUNER ON/OFF.
This will allow the user to regain CONTROL 3/CTL3 to be programmed for other functionality like an added effect ON/OFF, etc.
Press [MENU], press (KNOB1) for the CONTROL ASSIGN MENU,
Press (KNOB1) for CONTROL FUNCTION MENU,
Within the CONTROL FUNCTION MENU, press the [PAGE RIGHT > ARROW] button for Page 2.
Locate CUR NUM/CURRENT NUMBER in the bottom right corner of the CONTROL FUNCTION SCREEN (see below).
Turn (KNOB1) to SELECT and highlight the CUR NUM row for PREFERENCE, turn (KNOB6) to set to SYSTEM. (This will make CUR NUM for TUNER setting SYSTEM/GLOBAL for all PATCHES).
Turn (KNOB1) to highlight CUR NUM row for FUNCTION and turn (KNOB6) to set FUNCTION to TUNER,
Turn (KNOB1) to CUR NUM row for MODE and turn (KNOB6) to set MODE to TOGGLE.
The CONTROL ASSIGN FUNCTION has been set to SYSTEM, so there is no need to WRITE/SAVE settings, it will automatically remain set and saved.
Test and check in MEMORY MODE, use the PATCH NUMBER FOOT SWITCH currently selected (LED BLUE), press once for the PATCH, again for TUNER TOGGLE ON and press once more for TUNER TOGGLE OFF to return to MEMORY PATCH play.
Now move on to setup and program CTL3 for customized functionality for each PATCH while still retaining TUNER with CUR NUM/CURRENT NUMBER.
