The TM-6 PRO has four individual (Direct) outputs in addition to the main L/R and PHONES outputs, which can be custom assigned. For example, if you're wanting to send kick and snare sounds to separate channels in an external mixer, you can assign the sounds individually to the Direct outputs. Here's how:
1. Press the MENU button.
2. Cursor to the "SYS" icon, and then press ENTER.
3. Highlight "Output Assign" with the cursor up button, and then press ENTER.
The vertical numbers (1-6) represent the TM-6 PRO's trigger inputs. The MASTER section represents the Master outputs, and the DIRECT section on the right side represents the Direct outs.
4. Press the cursor right button to highlight trigger input 1 on the right side in the DIRECT section.
5. Press the +/- button to choose the output destination for trigger input #1 (DIRECT 1,2, etc,).
If you do not want to sound from the input to reach the MASTER output(s), be sure to set the MASTER to "OFF."
6. Repeat the Steps to assign the remaining inputs as desired.
7. When you're finished with the assignments, press the EXIT button. The new settings are saved automatically.