AD-10: How to Connect FS-6 for Input Selection
Press and hold EXIT + BOOST to enter the Assign Pedal Function Mode.
Press MEMORY once to find the category for
1F = CTL1 = B on FS-6 foot switch.
2F = CTL2 = A on FS-6 foot switch.
Then use the UP/DOWN arrow buttons to select: IN for INPUT SELECTION
Once desired selection is set for 1F and 2F press EXIT.
Connect the FS-6 with a 1/4" TRS cable and the following settings on the FS-6.
NOTE: 1/4" TS MONO INSTRUMENT CABLES must be connected to the AD-10
GUITAR INPUT 1 and 2 with instrumentation in order to use the INPUT SELECTION!
FS-6: 1/4" TRS CONNECTION JACK A+B and SETTINGS
AD-10 PEDAL FUNCTION SETTINGS MENU EXPLANATION
AD-10: CTL 1, 2 FOOT SWITCH 1/4" TRS STEREO CONNECTION JACK REAR PANEL
AD-10: GUITAR INPUTS 1 and 2 LOCATION REAR PANEL