On the V-1SDI, you can change the following on the Multiview output:
- Turn on/off Text Labels
- Turn on/off Tally Borders
- Red and Green boxes around A and B bus sources
- Turn on/off/position Audio Level Meter
- Note: On the V-1HD, you can only position the audio meters.
Configuring the Multiview
- On the V-1SDI panel, press and hold [ SETUP ] for 2 seconds to open the SETUP Menu.
Note: This displays the SETUP menu on the monitor connected to the MULTI-VIEW output connector. -
Using the [ AUTO ] button, navigate to Page 15/16, SYSTEM.
Note: You can use the [ MIX ] and [ CUT ] buttons to quickly navigate menu pages.
- Set the 1st through 3rd options: PVW INDICATOR: LABEL, TALLY, and AUDIO LEVEL METER.
- Using the Fader Bar, change the setting to customize the Multiview to your preferences.
In addition to turning the AUDIO LEVEL METER on/off, you can also position it along the UPPER or LOWER areas of the Multiview.
More Information
For more information about the Multiview Output, refer to the V-1SDI Reference Manual.
Note: This is a separate document from the Owner's Manual and RCS Owner's Manual.