The following procedure will guide you through setting up and recording an external mono instrument or audio device.
- Lower the BR-800’s MASTER fader.
- Connect the output of your instrument or device into the 1/4" input 4 on the back panel of the BR-800.
- Connect speakers to the red and white LINE OUT jacks of the BR-800 or headphones to the headphone jack of the BR-800.
- Turn up the volume of your external speakers.
- Press the MENU button.
- Use the Cursor arrow buttons to select “INPUT SELECT”and then press ENTER.
- Use the Cursor arrow buttons and the data dial to make the following settings on the screen:
INPUT : VOCAL (IN4)
MODE : MONO
- Press EXIT twice.
- Turn up the volume of your external instrument to a desired volume level and then begin playing the instrument.
- On the BR-800, adjust the INPUT SENS knob for input 4 so that their red PEAK indicators light only briefly at the loudest sounds of playing your instrument.
- Turn the REC LEVEL knob to the 12 o’clock position, and then slowly raise the MASTER fader.
- Press one of the REC buttons for tracks 1, 2, 3 or 4 to select the track on which recording will occur. Be sure that the selected button is lit solid red and not blinking.
- Press REC and then press PLAY. Recording will begin.
- Press STOP to stop recording.