| Note: This article refers to the 2011 MICRO BR BR-80 Digital Recorder. If you're looking for information on the BOSS MICRO BR Digital Recorder that was released in 2006, please clicking this link: MICRO BR |
- First set the BR-80's USB mode to "AUDIO":
- Press MENU
- Cursor to "FUNCTION" and press ENTER.
- Cursor to "USB" and press ENTER.
- Use the dial to select "AUDIO" and press ENTER.
- Then install the driver for the computer's operating system from the following link:
https://www.boss.info/us/products/micro_br_br-80/downloads/ - After installing the driver and with the BR-80 connected to the computer, follow the setup instructions of the DAW audio software for information regarding setting up the software with an audio interface (such as the BR-80). As each manufacturer's software differs from version to version, please refer to the audio software's current manual or that software company's online help for proper audio interface setup procedures.
- Be sure that the sample rate of the audio software being used is 44.1kHz--as this is the sample rate that the BR-80 operates at.