If the Aging function is “ON,” an internal temperature sensor is used to apply change to some synthesizer sounds (sounds for which the TONE parameter Pitch Drift is specified), simulating the way in which temperature variation and the passage of time after startup can affect the sound of an analog synthesizer.
Turn the Aging function “ON” as described below, and notice how the sound changes.
- Press the [MENU] button.
- Use the [1] knob or [2] knob to select “SYSTEM,” and then press the [ENTER] button.
- Use the [1] knob to select “Aging,” and use the [2] knob to select either “ON” or “FAST.”
- ON: Simulation is on. The status of Pitch Drift will change in approximately ten minutes, and will subsequently stabilize at the value of the TONE setting Pitch Drift.
- FAST: This mode shortens the change of the ON setting to approximately ten seconds, allowing you to hear the effect of Pitch Drift.
- Press the [WRITE] button to save the setting.