SY-1000: How To Change Patch Type To Normal Patch For Guitar Input
For every SY-1000 Patch there's a Patch Type switch placed in the MASTER/MST block for switching the Patch Type from GK (INPUT) PATCH to a NORMAL (GUITAR INPUT) PATCH and will allow the 1/4" TS Mono Instrument GUITAR INPUT to function for a PATCH.
For every SY-1000 Patch there's a Patch Type switch placed in the MASTER/MST block for switching the Patch Type from GK (INPUT) PATCH to a NORMAL (GUITAR INPUT) PATCH and will allow the 1/4" TS Mono Instrument GUITAR INPUT to function for a PATCH.
1. Choose any PATCH on the SY-1000.
2. Press - the EFFECTS button - use (KNOB 6) to navigate and select the MST block.
3. Use the page [RIGHT ARROW] button to go to page 2 of the MASTER MENU.
3. Use the page [RIGHT ARROW] button to go to page 2 of the MASTER MENU.
4. Press (KNOB 1) to adjust the PATCH TYPE from GK PATCH to NORMAL PATCH INPUT, press (KNOB 6) to OK and confirm PATCH TYPE change. Alternatively press (KNOB 5) to CANCEL.
If changing to NORMAL PATCH INPUT the GK icon at top of display will disappear for the PATCH.
If set to GK PATCH the GK icon will be shown and located at top of display.
If set to GK PATCH the GK icon will be shown and located at top of display.
This customized PATCH setting and changed needs to be WRITE/SAVED.
Press the [WRITE] button 3 times to WRITE/SAVE your PATCH TYPE CHANGE and settings to the current PATCH location.