Yes.
If an expression pedal (Roland EV-5) is connected to the rear panel FC1/L jack or FC2/C jack, you can use your foot to adjust the volume.
- You can also use the foot volume to adjust the volume output from the OUTPUT jacks.
If you want to use an expression pedal to adjust the volume, perform the following procedure to assign the appropriate function to pedal FC1 or FC2.
- Use only the specified expression pedal. This unit might malfunction if you connect a product made by a different manufacturer.
- Connect an expression pedal to the FC1/L jack or FC2/C jack.
- Press the [MENU] button.
- Use the cursor [∧] [∨] buttons to select “SYSTEM,” and then press the [ENTER] button.
- Use the cursor [∧] [∨] buttons to select “ASSIGN,” and then press the [ENTER] button.
- Use the cursor [<] [>] button to display the “PEDAL” screen.
- Use the cursor [∧][∨] buttons to select the PEDAL jack (PC1 or FC2) to which your expression pedal is connected.
- Use the [DEC] [INC] button to select “CC11.”
- To save the changes, press the [WRITE] button.
- For details on how to save a scene, refer to "Saving the System Settings (System Write)" in the RD-88 Owner's Manual or RD-88 EX Owner's Manual.
- If you want to make settings for each scene, use the scene edit ASSIGN parameter to make the setting in the same way, and then save the scene.