Here's how to import samples into the TD-27 from an SD Card.
Important Notes:
- The SD Card must be formatted in the TD-27 first before transferring .wav files to it.
- When transferring the files from the computer to the SD card, be sure to place them inside the "IMPORT" folder on the card.
- Samples must be imported from the SD card. It's not possible to import them through the TD-27's USB Computer connection.
- Files must be .wav 16 or 24bit/ 44.1kHz. https://www.roland.com/us/support/knowledge_base/360042928711/
1. Turn on the TD-27.
2. Insert the SD card that contains the .wav files into the TD-27's card slot.
3. Press the USER SAMPLE button.
4. Use the cursor buttons to highlight "IMPORT," and then press the ENTER button.
5. Turn the dial to choose//highlight the sample that you want to import. (Only one sample can be selected at a time).
- If desired, you can press the function 5 button (PREVIEW) to preview the file.
6. Press the function 1 button. The "IMPORT (DESTINATION)" screen appears.
7. Turn the dial to choose/highlight an empty location for the sample to be imported to. An empty location shows as "----------------------" .
8. Press function 5 (IMPORT).
9. Cursor right once to select "OK."
10. Press ENTER. "Processing" appears in the display while the sample is being imported.
If you receive an error message in the TD-27 after importing, see the "Important Notes" section above.