JUNO-DS61, JUNO-DS76, JUNO-DS88: How Do I Save My Split or Dual Settings?

On the JUNO-DS61, JUNO-DS76, and JUNO-DS88, settings for Split, Dual, and Super Layer need to be saved as a Performance.

To save your settings:

1. Press the [WRITE] button to make it light.
   The WRITE MENU screen appears.
2. Select "PERFORMANCE WRITE," then press the [ENTER] button.
   The name input screen appears.
3. Use the cursor buttons, value dial, and [-] [+] buttons to assign a name to the data you're saving.
4. When you've specified the name, press the [ENTER] button.
5. Use the value dial to specify the save destination (a USER Performance number).
6. Press the [ENTER] button.
   A confirmation message appears.
   If you decide to cancel, press the [EXIT] button.
7. Press the [ENTER] button to save the settings.
   Note: Never turn off the power while the screen indicates "Writing…."

To recall a saved Performance:

1. Press the [PATCH/PERFORM] button to display the PERFORM screen.
2. Move the cursor to the bank, and use the value dial to select "USER."
3. Move the cursor to the Performance number, and use the value dial to select the number you saved it to.