A performance of the JUNO-DS allows you to assign a different patch, drum kit, or sample to each of the 16 parts, enabling you to use 16 different sounds simultaneously. The following settings are also saved as performance settings.
| SPLIT | Use different sounds for the right and left hands |
|---|---|
| DUAL | Layer two sounds |
| SUPER LAYER | Layer a single sound to create a richer feeling |
You can find videos on how to configure these settings on our YouTube channel.
When you have finished configuring the settings, follow the steps below to save them as a performance.
- Press the [WRITE] button to make it light.
The WRITE MENU screen appears. - Select "PERFORMANCE WRITE", then press the [ENTER] button.
The name input screen appears. - Use the cursor buttons, [VALUE] dial and [-] [+] buttons, assign a name to the data that you’re saving.
- When you’ve specified the name, press the [ENTER] button.
- Use the value dial to specify the save-destination.
- Press the [ENTER] button.
A confirmation message appears.
If you decide to cancel, press the [EXIT] button. - Press the [ENTER] button to save the settings.
NOTE: Never turn off the power while the screen indicates “Writing....”