Yes. Perform the following procedure.
- Connect a footswitch (DP-2, DP-10, etc.) to the PEDAL CONTROL jack on the rear panel.
- Press the [MENU] button.
- Move the cursor over “SYSTEM” and press the [ENTER] button.
- Move the cursor to the tab, and use the [<] [>] buttons to switch to “PEDAL.”
- Select “PROG-UP (to switch tones in ascending order)” or “PROG-DOWN (to switch tones in descending order)” for Control Pedal Assign.
- Press the [EXIT] button.
- If you are in the Performance mode, this selects the next-numbered Performance.
- If you select “FAV-UP” or “FAV-DOWN” in step 4, the settings registered to the FAVORITE will be switched while the FAVORITE function is on.
- When using the DP-10, set the switch on the side of the DP-10 to “SWITCH” position.