The following will guide through backing up mixer settings to a USB drive and then reloading the backup. This is useful for having a safe copy of mixer settings or for copying mixer settings from one M-300 onto another M-300.
VIDEO: This can also be found in the following video: Roland M-300 Tutorial 11: Scene Memories - USB Backup
SAVING MIXER SETTINGS TO A USB DRIVE
- Insert a USB memory into the USB MEMORY port of the M-300.
- Press the SYSTEM button.
- Press F3 (LOAD/SAVE).
- Press F2 (SAVE).
- Press F8 (SAVE).
A “now processing” message will indicate the progress of the operation. When saving is completed, the progress indication will close.
LOADING MIXER SETTING FROM A USB DRIVE
- Insert a USB memory into the USB MEMORY port of the M-300.
- Press the SYSTEM button.
- Press F3 (LOAD/SAVE).
- Move the cursor to the project file list, and select the file that you want to load.
- Move the cursor to the LOAD SECTION and the LOAD LIBRARY areas, and select the sections that you want to load.
- Note: Select the "ALL" button for both the LOAD SECTION and LOAD LIBRARY if you want to load all settings from the USB backup.
- Press F1 (LOAD).
- Press F8 (LOAD).
A “now processing” message will indicate the progress of the operation. When loading is completed, the progress indication will close.