STUDIO-CAPTURE: Directly Outputting Each Channel’s Input

If you choose the command [Directly Output the Inputs] from the “Device” menu, the input signals from the INPUT 1–8 jacks will be passed directly to the output jacks.

Input 1 will be directly patched to output 1; input 2 to output 2; input 3 to output 3, and so on.

This is convenient when you want to use a mixing console to adjust monitor levels without using the STUDIO-CAPTURE’s internal mixer.

1. Open the STUDIO-CAPTURE Control Panel software.
   Windows:
   Click the start button and then click on "All apps". Open the Roland folder and then click on "STUDIO-CAPTURE".
   Mac:
   Open the Applications folder then click on "STUDIO-CAPTURE Control Panel."
2. In the STUDIO-CAPTURE Control Panel software, select "Device" at the top of the window.
3. Select "Directly Output the Inputs."