Aerophone Pro AE-30: The assign settings for the scene are not being applied.

When “Assign Source” is set to “System,” the system assign settings are given priority.
To apply the scene’s assign settings, edit the “Assign Source” settings.

Perform the following procedure

Settings to make on the Aerophone Pro Editor

1. Launch the Aerophone Pro Editor.
   - See the related Q&A, “How do I connect to the Aerophone Pro Editor?” for instructions on how to connect.
2. Tap the [EDITOR] button at the lower left part of the screen.
3. Tap the scene name at the top part of the screen.
   - The scene list appears.
4. Tap the scene to edit.
5. Tap “<” in the upper left part of the screen.
6. Tap the [COMMON] button at the bottom of the screen.
7. Tap “SCENE” for the “Assign Source.”
8. Tap the [WRITE] button.
   - The Scene Write screen appears.
9. Tap the [OK] button to overwrite.
   - To edit the save destination or scene name, use the “Scene Group,” “Scene” or “Scene Name” settings.

Settings to make on this instrument

1. Use the [SCENE] (▲/▼) buttons to select the scene to edit.
2. Press the [MENU] button.
3. Use the [–] [+] (</>) buttons to display the “Assign Source” screen for the scene.
4. Press the [MENU] button.
5. Use the [+] (>) button to select “Scene.”
6. Long-press the [MENU] button.
7. Select “User” with the [–] (<) button.
8. Select the user bank with the [SCENE CATEGORY] knob.
9. Use the [–] [+] (</>) buttons to select which user scene number is used to register the currently selected scene.
10. Press the [MENU] button.
11. Edit the scene name as needed.
12. Press the [MENU] button.
    - A confirmation message appears.
13. Press the [+] (>) button.
    -“Complete” appears. You’re now finished with the settings.