The procedure differs depending on the System Program version.
- Aerophone Pro AE-30 System Program Ver. 1.10 or later : "All Effects Off" has been added to turn off all effect settings made for scenes.
You can check the current version by following the steps below.
- Turn on the power.
- Press the [MENU] button to display the menu screen.
- Use the [-] [+] (< / >) buttons to select "Version" in the System settings.
- The current version appears. - Press the [SCENE] button to return to the Scene screen.
System program Ver. 1.10 or later
Perform the following procedure.
- You can also specify this setting using the "Aerophone Pro Editor" app.
- Press the [MENU] button.
- The Menu screen appears. - Use the [-] [+] (< / >) buttons to display the "All Effects Off" in the Scene settings.
- Press the [MENU] button.
- Use the [+](>) button to select “Yes.”
- To save a scene with the effect turned off, long press the [MENU] button to store it as a user scene.
System program Ver. 1.04 or earlier
Perform the following procedure.
- You need to use the Aerophone Pro Editor to turn off all of the effects. See the related Q&A, “How do I connect to the Aerophone Pro Editor?” for details on how to connect.
- Launch the Aerophone Pro Editor and connect to the AE-30.
- Tap the [EDITOR] button at the bottom of the screen.
- If the scene you want to edit is not shown at the upper left part of the screen, select the scene using the AE-30, or tap the scene name shown in the Aerophone Pro Editor and select from the list. - Tap the FX buttons (IFX, CH, DLY, RV) that are on to turn them off.
- Long-press the tones that are on.
- Tap the [EDIT] button.
- Tap the [MFX] button for partials that are on, or the “Tone Effects” for the MFX to turn them off.
- Repeat steps 5 and 6 for the other tones as well.
- To save your changes, tap the [WRITE] button.
- Select the save destination for the tone to edit the tone name as necessary, and tap the [OK] button.