XPS-30: Restoring the Factory Settings (Initialize)

You can return all of the XPS-30’s user settings to the state when the instrument was shipped from the factory (Factory Reset).

Follow the steps below:
NOTE:
- If the XPS-30’s internal memory contains important data that you’ve created, be aware that all of this user data will be lost when you execute the factory reset operation. If you want to keep this data, save it to USB flash drive before you continue.
- Never turn off the power or remove the USB flash drive while the screen indicates “Processing...”. 

1. Press the [MENU] button.
   The MENU screen appears.
2. Move the cursor to “UTILITY,” and press the [ENTER] button.
   The UTILITY screen appears.
   
3. Move the cursor to "FACTORY RESET", and press the [ENTER] button.
   A confirmation message appears.
   If you decide to cancel, press the [EXIT] button.
4. Move the cursor to “OK,” and press the [ENTER] button.
   When factory reset is completed, the display indicates “Completed. Please Shut down."
5. Turn the power of the XPS-30 off, then on again.