RC-500 Factory Reset (Initialization)
RC-500 FACTORY RESET INSTRUCTIONS
A user Factory Reset will reset and initialize the RC-500 back to default settings for it's current firmware.
A Factory Reset is a good procedure to perform after a firmware update, if the device was received second hand/used, if troubleshooting functionality or if user is confused and needs to reset back to default settings.
A Factory Reset will return all of the device settings back to default for the last installed firmware version (not back to original version 1.00), you can also specify which items to be reset.
* When you execute “Factory Reset,” all customized user settings will be lost.
In advance, please back up any user customized data to your computer.
1. Press the [MENU] button. The SETUP screen appears.
DISPLAY READS: SETUP > GENERAL
2. Turn the [MEMORY/VALUE] knob to select “F.RESET,” and press the [MEMORY/VALUE] knob.
DISPLAY READS: F.RESET > MEMORY
3. Turn the [MEMORY/VALUE] knob to specify the settings that will be returned to their factory set state, and press the [MEMORY/VALUE] knob.
MEMORY = Reset Memory 1–99.
SYSTEM = Reset only System Settings.
MEM+SYS = Reset Memory 1–99 and System Settings.
A confirmation message “ARE YOU OK?” appears.
* If you decide not to execute the factory reset, select “CANCEL” and press the [MEMORY/VALUE] knob.
4. Turn the [MEMORY/VALUE] knob to select “OK,” and press the [MEMORY/VALUE] knob.
The factory reset is executed.
* Do not turn off the power while the “EXECUTING...” message is shown.
Once the factory reset is complete, you are returned to the Play screen.
See page 25 of RC-500 Owner's Manual for official instructions and display visuals.
