RC-5: Setting the Tempo and Time Signature for Recording

Set the tempo and/or time signature beforehand, and then record while the rhythm plays.
- The recording time cannot be specified.

Follow the steps below.

Setting the tempo

1. Press the RHYTHM [TEMPO] button.
   - The tempo setting screen appears.
2. While the tempo setting screen is shown, turn the [MEMORY/LOOP LEVEL] knob to set the tempo.
   Setting range: 40.0~300.0

Tap tempo
You can set the tempo by pressing a button at the desired interval.

1. Press the RHYTHM [TEMPO] button several times in time with the desired tempo.

Setting a rhythm pattern and time signature

1. Select the memory for which you want to edit the rhythm settings.
2. Long-press the RHYTHM [ON/OFF] button.
   - The rhythm settings screen appears.
3. Turn the [MEMORY/LOOP LEVEL] knob to select “RHYTHM,” and press the [MEMORY/LOOP LEVEL] knob.
4. Turn the [MEMORY/LOOP LEVEL] knob to change the value, and then press the [MEMORY/LOOP LEVEL] knob.
   • PATTERN: Select the rhythm pattern.
   • BEAT: Specifies the time signature of the rhythm.
     - You cannot change this after the track is recorded. Be sure to set this before recording.
5. Repeat steps 3~4 as necessary.
6. Long-press the RHYTHM [ON/OFF] button to return to the play screen.
7. If you want to save the edited settings, execute the write operation.