TD-50X: Is it possible to cut unwanted low frequencies?

Yes. You can cut the low frequencies by setting the Lo Cut function to “ON.”

- The frequency setting is the same for each output.
- LO CUT does not work on USB audio.

Follow the steps below.

1. Press the [SETUP] button.
   - The SETUP MENU screen appears.
2. In the SETUP MENU 1 screen, press the [F1] (OUTPUT) button.
3. Press the PAGE [DOWN] button to display page 3 (OUTPUT ROUTING).
   - The routing screen appears.
4. Press the [F2] (LO CUT) button.
5. Use the cursor [∧] [∨] buttons to select the jack for which low frequencies are to be cut when outputting audio, and use the [-] [+] buttons or the dial to set the value to “ON.”
6. Press the [KIT] button to return to the DRUM KIT screen.