It is possible to route the MIX IN audio signals to the phones output jacks only in the TD-50X. This can be useful if you do not want the signal from the MIX IN jacks to be present in the Master and/or Direct outputs. Here are the Steps to assign the routing of the MIX IN jacks:
- Press the [SETUP] button.
- The SETUP MENU screen appears. - Press the PAGE [UP] button to display page 1 (SETUP MENU 1).
- Press the [F1] button (OUTPUT).
- Press [F1] again (MASTER tab).
- Press PAGE [UP] or [DOWN] to display page 2 ("2 OTHER OUTPUT" appears briefly).
- Use the cursor [<] [>] buttons to highlight "MIX IN."
- Press cursor [∧] to set the MIX IN to PHONES only.
- When you're finished, press the [KIT] button to return to the DRUM KIT screen.
- The new settings are saved automatically.