This operation raises the volume of the entire song as high as possible without causing the sound to distort. If the sound was recorded at too low a level, you can use this to increase the volume.
- Insert the SD memory card that you want to edit, and press the [SD CARD] button.
- Use the
or 
button to select the track you want to edit. - Press the [MENU] button to access the menu screen, and choose “Normalize?”
- If you’re sure you want to proceed, press the [ENTER] button.
The display will show “Processing..,” and the volume of the song will be raised. When the operation is completed, you’re returned to the audio source screen.
* If the volume of the song has already been maximized, the display will indicate “Checking...,” and then the editing process will end.
Important
● This editing process will take a certain amount of time. The time required for this operation will be approximately 1.5 times the playback time of the song. For example, if you apply this operation to a four-minute song, processing will take approximately six minutes.
● Maximizing the volume of a song will require free space equal to the size of the song you’re editing. For example, if you’re editing a five-minute song, you won’t be able to execute this operation unless you have at least five minutes of recording time remaining.
● This operation cannot be performed if the SD memory card’s write protect switch (Page 26) is in the “LOCK” position.