-
Press [UTILITY].
-
Press [PAGE] to display MIDI over the [F5] button. Press [F5].
-
On the Midi Parameter page Set "MIDI THRU" to "OUT".
- Set "SysEx. Tx Sw" to select "ON".
-
Set "MMC" to "MASTER".
-
Press F6 [EXIT].
- Hold down SHIFT and press EXT SYNC to jump to the SYNC PARAMETER screen.
- Set SYNC MODE to INT, for “Internal”.
The VS-2480 is now setup as MMC Master. Be sure to connect the MIDI OUT of the VS-2480 into the MIDI IN of the slave device and setup the slave device to receive MMC.
Press PLAY on the slave device so that it's waiting for MMC from the VS-2480, then press play on the VS-2480.