The A-49 supports the following power sources:
-
USB Bus Power from Computer
Power can be obtained from the computer's USB port. Set USB mode to "ADVANCED" by pressing [FUNCTION] > [ADV] key > [+] and install the USB driver compatible with your computer's OS.
- For Windows 10/11, automatic installation occurs when connected to an internet-connected computer via USB.
- When connecting through a USB hub, use a self-powered hub.
-
Power from iPad
Power can be obtained from an iPad. Set USB mode to "GENERIC" by pressing [FUNCTION] > [ADV] key > [-] and connect it. See "Connecting the A-49 to an iPad" for more details.
- Requires an additional Apple iPad Camera Connection Kit or Lightning - USB Camera Adapter and a self-powered USB hub for connection.
- The first-generation iPad is not supported.
-
USB Bus Power from INTEGRA-7 (System Program Ver. 1.30 and later)
Power can be obtained from the INTEGRA-7's USB port (front side).
- Check the current version and connection methods in "A-49 System Program" download page.
- MIDI data communication is not possible via USB. To send A-49 performance to INTEGRA-7 via MIDI, a MIDI cable connection is required.
- If you need to power your A-49 with versions before Ver. 1.2 using the INTEGRA-7, please reach out to our customer support for information on system program updates.
-
USB AC Adapter (System Program Ver. 1.30 and later)
- Press [FUNCTION], [PITCH], and [ASSIGN] buttons simultaneously while connecting to the USB AC adapter.