Juno-Di: Changing Octave Settings for Upper and Lower Parts in Split Mode

On the JUNO-Di, Split mode divides the keyboard into two sections called Upper and Lower, each assigned a different tone. This guide explains how to change the octave settings for each part and how to save those settings for future use.

Follow the steps below:

1. Move the cursor to the Upper tone number.
2. Use the OCTAVE [DOWN] and [UP] buttons to set the octave.
   - Pressing the OCTAVE [DOWN] button lowers the current tone by one octave, and pressing the [UP] button raises it by one octave. The pitch can be adjusted from three octaves down (-3) to three octaves up (+3).
3. Move the cursor to the Lower tone number.
4. As with the Upper part, use the OCTAVE [DOWN] and [UP] buttons to set the octave.

Saving the settings

1. Press the [▲] button several times to move the cursor to the top line.
2. Press the [WRITE] button.
3. The PERFORM WRITE screen will appear.
4. Use the dial to select the destination number.
5. Press the [WRITE] button.
   A confirmation message will appear.
6. Press the [ENTER] button to complete the save operation.