IR-200: “USED IN MEMORY” shows “NO” after loading a custom IR in the IR Loader

When the USED IN MEMORY column in the IR Loader displays “NO” (as shown below), the IR is loaded into the IR-200 but has not yet been written (WRITE) to a Memory.

To assign your custom IR to a Memory:

1. On the IR-200, turn the [CABINET] knob to select the USER IR you just loaded.
   The name of your custom IR will appear on the display.
2. Press the [MENU] button and [EXIT] button simultaneously.
   The WRITE UTILITY screen appears.
3. Push the knob below the “WRITE” indication on the screen.
4. Use the [AMP] (TARGET) knob to select the save destination, and push the [MEMORY] (ENTER) knob.
   If you decide to cancel, press the [EXIT] button.
5. Specify the memory name.
6. Push the [MEMORY] (ENTER) knob.
   The memory is saved.
   Once the IR is saved to a Memory, the USED IN MEMORY column in the IR Loader will show “YES.”