Aerophone Pro AE-30: How do I import a SOUND PACK?

This is how to import a SOUND PACK to the user tone/scene.

For details on preparing the sound files, please refer to the related Q&A "Aerophone Pro AE-30: How to install Sound Packs and Wave Expansions".

1. While holding down the [MENU] button, turn on the power.
   - Hold down the [MENU] button until the Roland logo disappears.
2. Connect the USB flash drive containing the tone file to the USB port on the AE-30.
3. Use the [<] [>] buttons to select “Import Tone,” and then press the [MENU] button.
4. Use the [>] button to select “YES.”
   - If you decide to cancel, press the [<] button to select “NO.”
5. Use the [<] [>] buttons to select the file to import and press the [MENU] button.
   - If this is the first time you are importing data, a screen appears that asks you to install the user license.
   - To continue importing, press the [>] button and then select “YES.”
6. Select which tones import.
   - All tones are automatically marked for import when you selected the SDZ file in step 5. If you do not want to import any of the tones, select them with the SCENE [∧/v] buttons and press the [-] button to remove the "+" mark.
   - A [+] mark is shown on the selected tone/scene number.
   - Press the [MENU] button when you’re finished selecting.
7. Select the import destination for the tones/scenes.
   The destination tones are automatically selected in order from the lowest numbered INIT TONE and are marked with a "+" mark. For example, if you select "SDZ001 Crystal Mood" for the AE-30 in its factory default state, the INIT TONE 001-032 are selected as the destination. Any tone renamed other than "INIT TONE" will be skipped.
   If there is any tone you do not want it to be the destination, select it with the SCENE [∧/v] buttons and press the [-] button to remove the "+" mark. Then, select another INIT TONE as the destination instead.
   - Use the [∧] [∨] buttons to switch, use the [>] button to select, and use the [<] button to disregard your selection.
   - A [+] mark is shown on the selected tone/scene number.
8. Press the [MENU] button when you’re finished selecting.
   - "Make Scene" is displayed when you select a SOUND PACK that contains only tone data. See "When importing tones..." below.
9. To import, press the [>] button and select “YES”; and to cancel, press the [<] button and select “NO.”
   - Selecting “YES” imports the data.
   - When the operation is completed, the display indicates “Completed!”.
   - Press the [MENU] button to return to the Import Tone screen.

10. Turn off the power and disconnect the USB flash drive.

11. Turn on the power.

When importing tones...

1. When “Make Scene” is displayed, this will automatically generate a scene for the tone to be imported.
2. Use the [∧] [∨] buttons to switch between scenes, use the [>] button to select, and use the [<] button to disregard your selection.
   - A [+] mark is shown on the selected scene number.
3. Press the [MENU] button when you’re finished selecting.
   - “Import OK?” is shown on the screen.

See also the following video.