IR-200: Holding an online session (remote session) on your computer with sound inputted from the IR- 200

As the IR-200 features audio interface functionality, you can input the sound of the IR-200 to your computer.

You can also use the loopback feature to mix the sound of the IR-200 with the playback sound from your computer.

Setting USB MODE

Windows, Mac OS

1. Press the [MENU] button.
2. Turn the [MEMORY] knob to switch the page, and push the knob below the “SYSTEM” indication on the screen.
3. Turn the [MEMORY] knob to switch the page, and push the knob below the “USB” indication on the screen.
4. Turn the [AMP] (MODE) knob to select “VENDOR.”
5. Install the IR-200 USB driver.
   https://www.boss.info/jp/products/ir-200/downloads/
6. Connect the IR-200 to your computer with a commercially available USB cable that supports USB 2.0.

iOS

1. Press the [MENU] button.
2. Turn the [MEMORY] knob to switch the page, and push the knob below the “SYSTEM” indication on the screen.
3. Turn the [MEMORY] knob to switch the page, and push the knob below the “USB” indication on the screen.
4. Turn the [AMP] (MODE) knob to select “GENERIC.”
5. Connect your iOS device to the IR-200.
6. Use one of the following cables to connect, according to the specifications of the iOS device.
   • Apple iPad Camera Connection Kit + USB cable (USB 2.0 compatible)
   • Apple Lightning - USB Camera Adapter + USB cable (USB 2.0 compatible)

Turning the loopback function on

Follow the steps below:

1. Press the [MENU] button.
2. Turn the [MEMORY] knob to switch the page, and push the knob below the “SYSTEM” indication on the screen.
3. Turn the [MEMORY] knob to switch the page, and push the knob below the “USB” indication on the screen.
4. Turn the [MEMORY] knob to switch between pages, and then turn the [AMP] (LOOPBACK) knob to “ON.”
   - Refer to “IR-200 Block Diagram” in the IR-200 Owner’s Manual for more on the audio routing.