Yes. The INPUT jack of the SY-200 is compatible with the input signals from mics and keyboards.
Check the following points when you connect a mic or keyboard.
| Type of mic | Use a dynamic microphone. |
|---|---|
| Audio cables | Use audio cables that do not contain resistors. |
| Input level | The nominal input level of the INPUT jack is -20 dBu. The sound may distort if this level is exceeded. If the level on your input device is too low, use an amp, mixer or similar device as necessary to boost the signal. |
| Adjusting the input volume | The input sensitivity cannot be adjusted on the SY-200. Adjust the volume on your input device. |