SY-200: Is the SEND/RETURN volume adjustable?

The volume of the signal output from the SEND jack is fixed.

Depending on the SEND/RETURN settings, you can adjust the RETURN volume using either the [D.LEVEL] knob or the [E.LEVEL] knob.

Follow the steps below:

1. Press the [MENU] button.
   - The unit enters MENU mode.
2. Turn the [MEMORY] knob to display page 2 (2/3), and press the [1] knob (SEND/RETURN).
3. Turn the [1] knob (SEND) to select the signal to output to the SEND jack.
   

   DIRECT	You can adjust the RETURN volume using the [D. LEVEL] knob.
   EFFECT	You can adjust the RETURN volume using the [E. LEVEL] knob.

4. Press the [EXIT] button or the [MENU] button twice to return to the previous screen.