This guide helps you create 3 independent outputs on your V-160HD, by converting a picture in picture layer to another AUX output. It is still a picture in picture layer, but it will function as an AUX.

 

What Each Output Does

The V-160HD has 4 video output types, plus 3 multi-views:

• Program - The currently selected input source, plus up to 4 picture in picture and 2 downstream key overlays for compositions. Supports cut, mix, and wipe transitions.
• Sub Program - A copy of Program, but you can independently select which overlays are visible, basically making it a remix of program. Supports cut, mix, and wipe transitions.
• Preview - Used to set up a source or composition before sending it to Program. Only supports cut transitions.
• AUX - An independent output used to display a different input source, but you can independently select which overlays are visible. Only supports cut transitions.

 

If you need an additional AUX bus, make a PinP layer full screen and output it on the Sub Program video bus.

• You can also disable DSK 1 and 2 on Sub Program if you want a clean output.
• The layer order is fixed, but you can swap settings between the same layer type. For example, PinP&Key 2's settings with PinP&Key 3.

 

In this guide, you will disable PinP & Key 4 on Program and disable PinP & Key 1 through 3 on Sub Program. Once you make PinP & Key 4 fullscreen and enable it, you can select it's source using the hardware panel, giving you another switchable AUX bus.

PinP & Key 4 needs to be enabled on Program at all times for this to work, otherwise you will see the selected source on both Program and Sub Program.

 

 

Menu Settings

Decide which outputs you want to assign the AUX and Sub Program buses to. You can assign the same bus to more than one output. 

• Menu > 1: Video Assign > HDMI/SDI OUT X > Program
• Menu > 1: Video Assign > HDMI/SDI OUT Y > Sub Program
• Menu > 1: Video Assign > HDMI/SDI OUT Z > AUX

 

Next, change the visible PinP and DSK layers for both Program and Sub Program.

• Menu > 1: Video Assign > Program Layer > PinP & Key 4 > Disable
  
  
• Menu > 1: Video Assign > Sub Program Layer > PinP & Key 1 > Disable
• Menu > 1: Video Assign > Sub Program Layer > PinP & Key 2 > Disable
• Menu > 1: Video Assign > Sub Program Layer > PinP & Key 3 > Disable
• Menu > 1: Video Assign > Sub Program Layer > PinP & Key 4 > Enable

If you do not want your DSK layers to appear on Sub Program, disable them.

• Menu > 1: Video Assign > Sub Program Layer > DSK 1 > Disable
• Menu > 1: Video Assign > Sub Program Layer > DSK 2 > Disable

 

Next, resize PinP & Key 4 to 100%, remove the window border, and press the PGM button to enable it.

• Menu > 7: PinP&KEY > PinP&KEY 4 > Type > PinP
• Menu > 7: PinP&KEY > PinP&KEY 4 > Window - Position H > 0.0%
• Menu > 7: PinP&KEY > PinP&KEY 4 > Window - Position V > 0.0%
• Menu > 7: PinP&KEY > PinP&KEY 4 > Window - Size > 100%
• Menu > 7: PinP&KEY > PinP&KEY 4 > Window - Cropping H > 100.0%
• Menu > 7: PinP&KEY > PinP&KEY 4 > Window - Cropping V > 100.0%
• Menu > 7: PinP&KEY > PinP&KEY 4 > Window - Border Width > 0

 

PinP & Key 4 is now visible only on your Sub Program outputs, you will not see it on Program.

You can change the PinP & Key 4 source by pressing the Source button, and choosing your source using the multi-function mode buttons.

To return to the previous mode (AUX, Memory, Macro), press Source again.

 

 

Additional Tips

Prevent Scenes From Changing Settings

Picture in Picture settings are affected by Preset Memory (aka scene) recalls. If you plan to create scenes, protect these settings from recalls by turning off these menus in the Load Parameter submenu.

• Menu > 13: Preset Memory > Load Parameter - Video Assign > Off
• Menu > 13: Preset Memory > Load Parameter - PinP & Key 4 > Off*

*Requires system program firmware 2.00 or later.

 

Prevent Accidentally Turning Off PinP & Key 4

You can lock the PinP & Key 4 PGM button to prevent accidentally turning it off, but do not lock the Setup button:

• Menu > System > Panel Lock > PinP & Key 4 - PGM Button > On

 

Using Demo Macros

The V-160HD has pre-built macros to help you learn this powerful feature. Using these macros is not recommended for the workflow in this guide, as some macros will modify PinP & Key 4.

You can edit or delete these macros as needed in the Macro menu.

 

 

More Information

• Video Bus Assignments and Layers  
• Picture in Picture
• Downstream Keyer