Below are the Steps to reset the SY-200 back to its factory-set state.
Note: Performing a Factory Reset will permanently erase all user/custom memory locations and settings. Be sure to write down any custom settings you wish to keep prior to performing the reset. The current installed firmware version will not be affected by the reset procedure. If you have recently performed a version update in the SY-200, it's recommended to perform a Factory Reset immediately after the firmware update process.
- With the SY-200 powered ON, press the [MENU] button.
The unit enters MENU mode. - Navigate and select "FACTORY RESET."
- Use and turn KNOB 1 and KNOB 3 to edit the reset range for FROM: and TO:
For a full reset choose FROM: SYSTEM TO: 128. This will reset all SYSTEM and MEMORY data. - Use the MEMORY KNOB to select "OK" and press the MEMORY KNOB as a button to confirm reset.