GX-100: Switching between memories using DAW software

The BOSS GX-100 memories can be switched by sending program change messages from a MIDI track in DAW software via USB.

1. Press the [MENU] button.
   
2. Touch <MIDI>.
   
3. Touch <MIDI SETTINGS>.
4. Touch <RX CHANNEL>.
5. Use knob [1] to set RX CHANNEL to match the transmit channel of the MIDI track in the DAW software.
6. Touch "<<" to return to the MIDI menu, then touch <PROGRAM MAP>.
7. Check which memory number corresponds to the program number.
   Refer to “PROGRAM MAP BANK1-BANK3” in the GX-100 Parameter Guide for details.
8. Insert the program change number into a MIDI track in the DAW software.
   Refer to the DAW software's owner's manual for how to input MIDI data.
9. Play back the MIDI track to verify that the GX-100 memory switches at the correct timing.