JUNO-X: How do I restore this unit to its factory-set default state?

By executing a factory reset, you can restore all of the settings of the JUNO-X to their factory default state.

NOTE: When you execute this operation, all saved settings including the sound parameters are lost. If you want to restore the current settings later, be sure to back up the data before restoring the factory settings.

Press the [MENU] (WRITE) button. Follow the steps below.

1. Use the [∧ SELECT V] knob to select “UTILITY”, and then press the [ENTER] (INIT) button.

2. Use the [∧ SELECT V] knob to select “FACTORY RESET”, and then press the [ENTER] (INIT) button.
   The FACTORY RESET screen appears.

3. Use the [∧ SELECT V] knob to select the item to execute, and press the [ENTER] (INIT) button to select its check box.
   Press the [ENTER] (INIT) button again to clear the check box.

   Item	Explanation
   Reset User Data	Initializes the scenes and user tones.
   Reset System Data	Initializes the system settings.
   Remove License  This is displayed if a sound pack or wave expansion is imported/installed.	Initializes the user license and wave expansion. Initializing the user license lets you import/install a sound pack or wave expansion that was downloaded with a different user license. This deletes the currently installed wave expansion.

4. Press the [>] button.
   A confirmation message appears.
   If you decide to cancel, press the [EXIT] button.

5. To execute, use the [- VALUE +] knob to select “OK”, and then press the [ENTER] (INIT) button.
   The display indicates “Completed. Turn off power”.

6. Turn on the JUNO-X again.
   Never turn off the power or disconnect the USB flash drive during a process, such as while the “Executing…” display is shown.